Back to top
   Call Me Free Send SMS Send Inquiry

Mechanical Pump Seals

 This array of mechanical pump seals is suitable for handling potable water, sewage water and chemical based fluid. Advanced design of these seals helps to minimize corrosion and wear of their shaft. Premium grade raw materials are used to design this array of sealing components. Offered seals are designed wit silicon carbide or tungsten carbide made face sealing part; premium grade rubber fabricated secondary sealing part and stainless steel spring with wear proof design. Offered mechanical seals can be used under wide temperature ranges. Quality of these mechanical pump seals has been verified on the basis of their service life, sealing attributes and compatibility with different media.

Water Seals

This mechanical pump water seal is suitable for high speed rotation based job. Offered seals are mainly used for automatic water pumps that have high operating speed. Offered mechanical pump water seal can endure standard operating temperature range and specific operating pressure. This seal is especially suitable for handling potable type and coolant water. Premium grade raw materials have been used to design its seal face and secondary sealing component. Long working life and low maintenance design are the key aspects of this seal.

Electroplating Seals

Electroplating Seal is suitable for handling light acid based substances. This single acting type seal can be used at maximum 70 degree C operating temperature and at maximum 7 bars of operating pressure. Rotational direction of this seal depends on specific application requirement. This friction protected Electroplating Seal is well known for its thick metallic section which proves to be effective in improving its deformation resistance capacity. Standard of this seal has been checked as per its diameter, longevity and design precision. 

  • Title : Electroplating Type (AST-E-304)
  • Application : electroplating, light acid
  • Features : Single acting, independent on direction of rotation.
  • Operating Conditions : temperature upto 70degree C
  • Pressure : Upto 7 Bars
  • Available Size : 1

Single Spring Seal

  • Title : Single Spring Seal (AST-SS-303)
  • Application : corrosive/viscous fluids
  • Features : Single arrangements both balanced and Unbalanced.
  • Operating Conditions : temperature -75degree C to 220 degree C
  • Pressure : Vacuum upto 10kg/cm for unbalanced and upto 20kg/cm for Balanced
  • Available Size : as per required

Grundfos Mechanical Pump Seal

Single acting Grundfos Mechanical Pump Seal is well known for its long lasting quality and ergonomic design. Specially designed for Grundfos pump, this pump seal uses stationary and dynamic ring based seal face made of tungsten carbide or silicon carbide. Material like NBR/EPDM/Viton has been chosen to design its secondary sealing component. To extend its service life, stainless steel of 304 grade or 316 grade has been used to design its hardware accessory. Quick to install, offered pump seal uses shaft of specific size. Wide operating temperature range of this Grundfos product has made it the most sought after mechanical sealing components available in the market.

MG12 Mechanical Seals

Single acting MG12 Mechanical Seals are suitable for handling light chemicals, waste water and pure drinking water. Designed as per global norms, these mechanical seals have rubber bellows that maintain correct alignment of these seals to avoid displacement of their shaft. These types of rubber bellows are effective in avoiding fretting or wear and rust formation of shaft.  MG12 Mechanical Seals use tungsten carbide/silicon carbide/ceramic or carbon as their face sealing materials. To design their secondary sealing component, standard grade neoprene or EPDM or viton is chosen. Stainless steel ( 304/316 grade) made hardware spring of these mechanical seals is completely wear and rust protected for a prolonged service life. 

  • Title : MG-12 (AST-ME-202)
  • Application : Water, sewage, light chemicals
  • Features : Single acting, independent on direction of rotation.
  • Operating Conditions : temperature upto 200 degree C
  • Pressure : Upto 10 Bars
  • Available Size : 60 mm

We want inquiries from Mumbai, Maharashtra.
Bharat Patel Compound, Opp. Pravasi Indl. estate, next society Masjid,Unit No. 1, Goregaon (E), Mumbai - 400063, Maharashtra, India
Phone :08045815260
Mr A. H. Mansuri (Proprietor)
Mobile :08045815260